Click here to buy Factory Pipe Yamaha Mod Pipe Kit -$730
Click here to buy Factory Pipe Kawasaki Wet Pipe Kit -$820
Get yourself the gift of horsepower!
Click here to buy Riva SCOM Sea-Doo 300 – $189.99
The shortest steering system available to date! The Jetworks Central Steering System(AKA C.S.S.) is 4 inches shorter than stock, putting the bars on top of the center pivot point, offering less flex and a more responsive and precise feel when turning, and because here at Jetworks, we ride salt constantly, we decided to not reinvent the wheel, and designed our system with bushing. This means no more rusty bearings, maintenance and incredibly smooth turning feel. Works with Yamaha & Kawasaki’s and includes all necessary hardware for installation.
Click here to buy Jetworks CSS (Central Steering System) – $199
-Fat bars only.
-Works on 1996+ SuperJet, AC, and UMI handlepole With Jetworks Chinpad
-Cast & Solid Billet RRP handlepole With Ninja Chinpad
Also new is a Surf Plug for all Rickters! 
It’s common knowledge that the scuppers on most skis end up doing more harm than good, and the Rickters are no exceptions to the rule, this plug works in conjunction with you exciting scupper valve by fitting inside the scupper tube adding that extra little piece of mind for when you ski sit upside down from a failed flip or roll.
Works on all Rickters and aftermarket hulls that use a Rickter style and size scuppers. 2 & 3/4″(70mm).
Click here to buy Jetworks Surf Drain Plug – $125
***We Strongly recommend not leaving your ski floating in the water for long periods of time if you have a scupper or this drain plug.
Coming after the Rickter EVO comes the Edge, Featuring a shorter hull and redesigned rocker, its designed specifically for surf riding with flat water capabilities.
Available in hull only or in custom turn key ski with Jetworks 771cc, 950, 1100cc, or 1200cc drivetrain configurations.
Taking orders now!
Ask Us About Our Starter Kit!
Recently Completed Jetworks Built 950cc Mega Bore Rickter Edge in Blue “Trash Look”
Made in Japan and used by the pro’s, these beach totes disassemble for easy transport and includes large custom spec Factory Zeros wheels and tires for easy maneuverability on the beach!
Factory Zero Ski Tote $850
And new for 2015 the RRP Freestyle Trim system was designed to allow for better control during maneuvers and tricks and it’s tight tolerances minimaize water pressure loss. Available for 144mm & 155mm Yamaha style pumps.
$650 144mm
$750 155mm
Also new is the updated version of the Solas Yamaha style pumps, now in 148mm sizes and still made of 100% stainless steel for a lifetime of use, even in salt water! Stator and wear ring both available in 148mm sizes to fit you new Jetworks Spec 148mm Impeller.
$999.99 for the set, also sold individually.
$646.99 Solas 148mm Stainless Steel Pump Stator Section
$392.99 Solas 148mm Stainless Steel Wear Ring
Black Jack T.T. Carb Modification The Black Jack T.T. Mod is the best and only modification for your Stock 38mm OR 40mm Mikuni Carburetors off of the 1996+ Yamaha 701cc SuperJet and Kawasaki 800SX-R/ 750SXI-Pro
Just Like there big brothers SBN Black Jacks they don’t load up, are easy to tune, offer superb fuel consumption when compared to bigger carbs and best off all, hit extremely well for their size. They also allow you to use you stock air box which makes them perfect for surf riding.
Modification is $188 Per Carburetor
*This is a modification to customer provided carburators, we do not sell The Black Jack TT out right.
for the larger sized Black Jack Carburators sold outright click here Black Jack SBN’s
Modification is $188 Per Carburetor
Watch the video below so see the carbs in action on a Jetworks 850cc SuperBore engine!
The release of the Sea-Doo Spark has taken the PWC community by storm, not only due to its affordability, but also because if its playful hull, but like with all performance motor-sports their are always people searching for more, and the Jetworks Ignitor Kit is perfect for the spark owner who’s looking to get the most fun out of their Sea Doo Spark!
We have a few left over from our last shipment.
These always sell out now that people are putting them on some OEM cylinders.
Get your’s before their gone!
Kawasaki Conversion plate also available.
Contact us for more info.
New for 2012 are the replacement reeds for the Boyesen Rad Valve Cages.
After many request they are finally here. Allows air to flow where it needs to all while having awesome durability. Designed with freestyle in mind.
Available for Yamaha & Kawasaki for $134.99 For both Cylinders.
Call or e-mail us to purchase yours today.
Boyesen Rad Reeds
Jetworks Rad Replacement Reeds
Jetworks Rad Replacement Reeds
